Direktgesteuertes Wegeventil - Serie D1VW

Die direktgesteuerten Wegeventile der Serie D1VW 8 Watt in NG06 (CETOP 03 / NFPA D03) ermöglicht direkten Anschluss an eine SPS oder einen Busknoten und spart somit die Verwendung eines Relais. Dieses Ein / Aus-Ventil bietet hohe Funktionsgrenzen bis 60 I / min in Kombination mit einem sehr geringen, energiesparenden Druckverlust durch optimierte Durchflusswege. Der maximale Betriebsdruck beträgt 350 bar.

Märkte:
• Industrie

Merkmale und Vorteile:
• Kompaktes, bewährtes Design, das unsere langjährige Erfahrung in der Hydraulik vertritt
• Niedriger Druckverlust - dadurch geringer Energieverlust im Betrieb
• Große Auswahl an Spulen - passend für alle Hydrauliksysteme
• Kürzeste Durchlaufzeit - keine Lagerung erforderlich

Anwendungen:
• Werkzeugmaschinen

D1VW 8 Watt-Ventile werden mit Standard Magnetanschluss (nach EN175301-803) und M12 x 1 (IEC 61076-2-101) angeboten. Die Version mit M12 x 1 Anschluss und LEDs entspricht dem DESINA Standard (DEzentralisierte und Standardisierte INstAllationstechnik) für Werkzeugmaschinen.

Preis	Name	Funktion	Schiebercode	Konfiguration	Dichtungsmaterial	Magnetventilanschluss	Elektrische Bauteile-Option	Schieberposition	Produktserie	Anschluss	Montageart	Montageposition	Bedienungsart	Betätigungsart	Eingangsspannung	Stromverbrauch	Funktion	Maximaler Betriebsdruck	Maximaler Durchfluss	Maximale Betriebstemperatur	Minimale Betriebstemperatur	Für Fluidtyp	Dichtungsmaterial	Gewicht	Konfiguration	Spulentyp	Elektrische Bauteile-Option	Erfüllte Spulen-Spezifikationen	Weitere Optionen
854,00 €	D1VW001CNJDL	Directional Control	001	na	NBR	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment, pins 1 and 2 not connected	3 positions, spring offset in position 0, operated in position a or b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	3-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	2.1 kg
645,00 €	D1VW001CNJWL	Directional Control	001	na	NBR	Connector as per EN 175301-803	M12 pin assignment, pins 1 and 2 not connected	3 positions, spring offset in position 0, operated in position a or b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	3-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	2.1 kg	C - Double solenoid, 3 position, spring centered	DIN w/o Plug	N/A	N/A	N/A
645,00 €	D1VW002CNJWL	Directional Control	002	na	NBR	Connector as per EN 175301-803	M12 pin assignment, pins 1 and 2 not connected	3 positions, spring offset in position 0, operated in position a or b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	3-way	350 bar	20 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	2.1 kg	C - Double solenoid, 3 position, spring centered	DIN w/o Plug	N/A	N/A	N/A
579,00 €	D1VW002KNJDLJ5	Directional Control	002	na	NBR	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment DESINA design, pins 1 and 2 connected	2 positions, spring offset in position 0, operated in position b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	2-way	350 bar	20 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	1.5 kg
474,00 €	D1VW002KNJWL	Directional Control	002	na	NBR	Connector as per EN 175301-803	M12 pin assignment, pins 1 and 2 not connected	2 positions, spring offset in position 0, operated in position b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	2-way	350 bar	20 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	1.5 kg	K - Single Solenoid, 2 position, spring centered. P to A and B to T when energized	DIN w/o Plug	N/A	N/A	N/A
854,00 €	D1VW004CNJDLJ5	Directional Control	004	na	NBR	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment DESINA design, pins 1 and 2 connected	3 positions, spring offset in position 0, operated in position a or b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	3-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	2.1 kg
645,00 €	D1VW004CNJWL	Directional Control	004	na	NBR	Connector as per EN 175301-803	M12 pin assignment, pins 1 and 2 not connected	3 positions, spring offset in position 0, operated in position a or b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	3-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	2.1 kg	C - Double solenoid, 3 position, spring centered	DIN w/o Plug	N/A	N/A	N/A
705,00 €	D1VW008CNJWL	Directional Control	008	na	NBR	Connector as per EN 175301-803	M12 pin assignment, pins 1 and 2 not connected	3 positions, spring offset in position 0, operated in position a or b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	3-way	350 bar	28 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	2.1 kg	C - Double solenoid, 3 position, spring centered	DIN w/o Plug	N/A	N/A	N/A
858,00 €	D1VW011CNJDL	Directional Control	011	na	NBR	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment, pins 1 and 2 not connected	3 positions, spring offset in position 0, operated in position a or b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	3-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	2.1 kg
645,00 €	D1VW011CNJWL	Directional Control	011	na	NBR	Connector as per EN 175301-803	M12 pin assignment, pins 1 and 2 not connected	3 positions, spring offset in position 0, operated in position a or b	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	3-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	2.1 kg	C - Double solenoid, 3 position, spring centered	DIN w/o Plug	N/A	N/A	N/A
579,00 €	D1VW020BNJDLJ5	Directional Control	020	na	NBR	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment DESINA design, pins 1 and 2 connected	2 positions, spring offset in position b, operated in position a	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	2-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	1.5 kg
606,00 €	D1VW020BVJDLJ5	Directional Control	020	na	FPM	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment DESINA design, pins 1 and 2 connected	2 positions, spring offset in position b, operated in position a	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	2-way	350 bar	60 L/min	60 °C	-25 °C	Water glycol	FPM	1.5 kg
914,00 €	D1VW020DNJDL	Directional Control	020	na	NBR	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment, pins 1 and 2 not connected	2 positions, detent, operated in position a or b, no center position, no offset position	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	2-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	1.5 kg
914,00 €	D1VW020DNJDLJ5	Directional Control	020	na	NBR	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment DESINA design, pins 1 and 2 connected	2 positions, detent, operated in position a or b, no center position, no offset position	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	2-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	1.5 kg
709,00 €	D1VW020DNJWL	Directional Control	020	na	NBR	Connector as per EN 175301-803	M12 pin assignment, pins 1 and 2 not connected	2 positions, detent, operated in position a or b, no center position, no offset position	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	2-way	350 bar	60 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	1.5 kg	D - Double solenoid, 2 position, detent	DIN w/o Plug	N/A	N/A	N/A
579,00 €	D1VW026BNJDLJ5	Directional Control	026	na	NBR	M12x1 on coil as per IEC 61076-2-101	M12 pin assignment DESINA design, pins 1 and 2 connected	2 positions, spring offset in position b, operated in position a	Directional control valve	NG06 / CETOP 03	Subplate mounting	Unrestricted, preferably horizontal	Direct	Solenoid	24 VDC	8 W	2-way	350 bar	28 L/min	60 °C	-25 °C	Hydraulic oil according to DIN 51524	NBR	1.5 kg